Comments on: Replacing and Tensioning Ducati 748/916/996 Timing Belts http://scandalon.com/2009/06/ducati-4v-timing-belts-diy-howto-writeup/ Surmounting the stumbling blocks of life. Wed, 18 Jan 2012 20:22:15 +0000 hourly 1 http://wordpress.org/?v=3.0.5 By: tremelune http://scandalon.com/2009/06/ducati-4v-timing-belts-diy-howto-writeup/comment-page-1/#comment-104 tremelune Tue, 14 Sep 2010 15:46:17 +0000 http://scandalon.com/?p=3#comment-104 You'll get a better response on Ducati.ms: http://www.ducati.ms/forums/forumdisplay.php?f=56 You’ll get a better response on Ducati.ms:

http://www.ducati.ms/forums/forumdisplay.php?f=56

]]> By: AhmadMan http://scandalon.com/2009/06/ducati-4v-timing-belts-diy-howto-writeup/comment-page-1/#comment-103 AhmadMan Tue, 14 Sep 2010 15:11:41 +0000 http://scandalon.com/?p=3#comment-103 Hi... I got problem, Basically i tried change my 916 belts, but is was failed. The cam pully twisted. I have turned back to marking position, when the belt installed and everything ready, i can't start the bike. It was noise sound (probably valve) . I'm sure the valve not in correct position. Please give me some guide to solve this problem. Now i got problem to install the belt. Hi…
I got problem,
Basically i tried change my 916 belts, but is was failed. The cam pully twisted. I have turned back to marking position, when the belt installed and everything ready, i can’t start the bike. It was noise sound (probably valve) . I’m sure the valve not in correct position.
Please give me some guide to solve this problem.
Now i got problem to install the belt.

]]>